Hi,
Today i have build in the HXC floppy Drive emulator into my Roland S330.
From JF i got the HXCSDFE.CFG file and the S330_Util1.hfe file wich i put on the formated FAT32 16 gig SD card.
After i started up the S-330 it's starting to load the utility disk. But when it's on 008/80 it stops and there is a message on the (left) screen of the S-330 itself saying: SEE CRT DISPLAY EXT CTRL = MOUSE. (I don't have a mouse or monitor)
What to do???
Thanks,
Olivier
Roland S-330 Utilitydisk not loading?
Re: Roland S-330 Utilitydisk not loading?
hi,
please look into the S-330's guide book, page 7 (http://www.sgroup.ca/archive/docs/S330_guide_book.pdf) and boot up your sampler according to your needs. There are three modes available while powering up. Hope this will be helpful. Best regards
please look into the S-330's guide book, page 7 (http://www.sgroup.ca/archive/docs/S330_guide_book.pdf) and boot up your sampler according to your needs. There are three modes available while powering up. Hope this will be helpful. Best regards
Re: Roland S-330 Utilitydisk not loading?
Issue solved via email (problem not really related to the emulator.)