DF0:unreadable
DF0:unreadable
df0:unreadable DF1 is working with switch 2 and i can get DF0 wroking if i use switch 5 (drive b) but the (normal) setting doesn't work
it's a slim version
Cheers
Marc
it's a slim version
Cheers
Marc
Re: DF0:unreadable
No one ?
i updated the firmware a few times with no luke.
i updated the firmware a few times with no luke.
Re: DF0:unreadable
Too few informations about your setup. Which amiga ? how many drive into the machine ? How do you use the emulator (with the file selector ?) ?
how is connected the emulator ?
how is connected the emulator ?
Re: DF0:unreadable
True
Amiga 1200 only hxc no external floppy drives.I use the normal amiga floppy cable and file selector.
Amiga 1200 only hxc no external floppy drives.I use the normal amiga floppy cable and file selector.
Re: DF0:unreadable
So the hxc is inside the amiga ?odo wrote:True
Amiga 1200 only hxc no external floppy drives.I use the normal amiga floppy cable and file selector.
Re: DF0:unreadable
Can't find edit post so sorry for a new one
More info!
a1200 kickstart 3.1
blizzard 060 @50 128mb ram
RapidRoad Usb
indi mk2 not de CR
os3.5 CWB
Best A500 PSU
Bord 2b
2.5 ide hdd
total recap well don not by me
Also tried it on a other on with no luke
regards
Marc
More info!
a1200 kickstart 3.1
blizzard 060 @50 128mb ram
RapidRoad Usb
indi mk2 not de CR
os3.5 CWB
Best A500 PSU
Bord 2b
2.5 ide hdd
total recap well don not by me
Also tried it on a other on with no luke
regards
Marc
Re: DF0:unreadable
Hard to say. There is maybe an hardware problem. can you try the emulator on another machine ?
Re: DF0:unreadable
I have the exact same problem. I mount two demo images in slot 001. The drives show as DF0:???? and DF1:NDOS. If I swap the images, DF0 is still unreadable. I have an Amiga 500+ with kipper2k's A504IDE with three CF card partitions and the Gotek is mounted internally. HxC firmware v3.0.8.2a.
Has anyone found a solution to the problem?
Has anyone found a solution to the problem?
Re: DF0:unreadable
If you only use one emulated drive (DF0:), does it work as it should?
Re: DF0:unreadable
Is it possible to turn one drive off in hardware? Turning it off in the Manager does not work...Arnie wrote:If you only use one emulated drive (DF0:), does it work as it should?
Re: DF0:unreadable
Yes, just set the dip switch for the first drive [a] to on, leave off.
Re: DF0:unreadable
Problem solved it was the dip switch soldered a wire (drive A DF0)