HxC installed on a KORG Triton Rack

HxC Floppy emulator support for all others Keyboards/Samplers...
Post Reply
notoric
Posts: 3
Joined: Fri Mar 09, 2018 6:40 pm

HxC installed on a KORG Triton Rack

Post by notoric »

A friendly hello to everyone,

today I succesfully installed the SD HxC Floppy Drive Emulator Rev.F on a Korg Triton Rack: :D

- connected to the original ribbon and power cables
- original floppy drive Panasonic JU-257A107P
- default 1,44 MB hfe floppy images
- jumper setting on ID1A

There were small washers between the floppy drive and the Triton chassis. I had to use a little glue to hold them in place while putting the screws back in.


Kind regards,
Alex
Top
Jeff
Site Admin
Posts: 8211
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:
Contact Jeff

Re: HxC installed on a KORG Triton Rack

Post by Jeff »

Thanks for the feedback ! :D
Top
teevee
Posts: 137
Joined: Sun Nov 03, 2013 7:21 pm

Re: HxC installed on a KORG Triton Rack

Post by teevee »

notoric wrote: ↑Wed Dec 05, 2018 9:19 pm A friendly hello to everyone,

today I succesfully installed the SD HxC Floppy Drive Emulator Rev.F on a Korg Triton Rack: :D

- connected to the original ribbon and power cables
- original floppy drive Panasonic JU-257A107P
- default 1,44 MB hfe floppy images
- jumper setting on ID1A

There were small washers between the floppy drive and the Triton chassis. I had to use a little glue to hold them in place while putting the screws back in.


Kind regards,
Alex
Hi Alex,

what is the native format?
Top
Post Reply

Return to “Miscellaneous Keyboards/Samplers”