HB3 wrote:The 1.6 mb files. EMXP could convert the to working FHE files but I couldn't get the HxC software to work.
Have you selected the "Predefined Disk Layout" to "Akai S950 3"5 HD Floppy" before loading the raw file ?
HB3 wrote:The 1.6 mb files. EMXP could convert the to working FHE files but I couldn't get the HxC software to work.
look fine.HB3 wrote:Yes. I just went through the process to double check. I'm using the mac version of the software.
Here is an example Akai .img file:
https://we.tl/VMM5UOu7WO
Here is an example of the output from HXC:
https://we.tl/j7p6ejK58Y
Is this HFE file working ? :HB3 wrote:My HxC had the S950 resistor mod added by Lotharek.
I have tested the image files in the Akai image archive and they work with my HxC.
When I convert a IMG file to a HEF file using EMXP they work with my HxC.
When I try to convert IMG files in the HxC software they DO NOT work with my HxC.
If you were able to get the example IMG file I uploaded to convert into a FHE file I must be doing something wrong. Please outline the exact steps you took to turn the IMG file into a FHE file.
Yes the HFE file is working on the Akai.Jeff wrote:Is this HFE file working ? :
https://hxc2001.com/vrac/S1000-109.zip
Both files (mine and your HFE) are exactly the same. So your file should work the same as mine...HB3 wrote:Yes the HFE file is working on the Akai.Jeff wrote:Is this HFE file working ? :
https://hxc2001.com/vrac/S1000-109.zip
When I take the image file and convert I get this file:
https://we.tl/ykE8i8Qcyt
i really don't know... both files are exactly the same.HB3 wrote:The software creates a file called "Raw Image"
When I rename that file and add .HFE at the end it doesn't work.
What am I doing wrong?