Hey Jeff, I just got a Spec +3 and I'm trying to use my SD HxC (old version, old hardware). I changed the original 26 pin cable with a standard one (http://www.secarica.ro/html/plus3_hardw ... 5inchdrive), converted some DSK images (from World of Spectrum) but the Spectrum waits forever when I try to read a disk.
I know your droped the support for the old version, but do you have some tips for the problem?
Thanks
Spectrum +3
Re: Spectrum +3
Have a look to the ready line and try to play with the interface mode.DFL wrote:Hey Jeff, I just got a Spec +3 and I'm trying to use my SD HxC (old version, old hardware). I changed the original 26 pin cable with a standard one (http://www.secarica.ro/html/plus3_hardw ... 5inchdrive), converted some DSK images (from World of Spectrum) but the Spectrum waits forever when I try to read a disk.
I know your droped the support for the old version, but do you have some tips for the problem?
Thanks
Re: Spectrum +3
Tryed to export in all interface modes (except "double step"). Same problem.Jeff wrote: Have a look to the ready line and try to play with the interface mode.
Change the Ready line (34) to Disk Change (2) and tested all the images again. Still no luck
Re: Spectrum +3
mmhhh and what about your wiring? can you check the index signal ?DFL wrote:Tryed to export in all interface modes (except "double step"). Same problem.Jeff wrote: Have a look to the ready line and try to play with the interface mode.
Change the Ready line (34) to Disk Change (2) and tested all the images again. Still no luck