osborne 1
Re: osborne 1
Can you talk about the SD card flashing process? I'm going to try to get this working with a Zorba 2000 but have no idea how to take a .Td0 (Teledisk image) and flash an SD card with it ...
See, the Zorba I have has no disks and I cannot find anyone willing to make me legit disks, so I'm hoping I can use this emulator to boot the darn thing with 1 real 1 emulated drive.
Anyone have any direction you could give me?
See, the Zorba I have has no disks and I cannot find anyone willing to make me legit disks, so I'm hoping I can use this emulator to boot the darn thing with 1 real 1 emulated drive.
Anyone have any direction you could give me?
Re: osborne 1
Use this to convert your td0 file :h3rb wrote:Can you talk about the SD card flashing process? I'm going to try to get this working with a Zorba 2000 but have no idea how to take a .Td0 (Teledisk image) and flash an SD card with it ...
See, the Zorba I have has no disks and I cannot find anyone willing to make me legit disks, so I'm hoping I can use this emulator to boot the darn thing with 1 real 1 emulated drive.
Anyone have any direction you could give me?
https://hxc2001.com/download/floppy_driv ... t_beta.zip
-
- Posts: 11
- Joined: Wed Nov 15, 2006 11:32 am
Re: osborne 1
Hello I want to recreate floppy disk for my Osborne I computer (come without floppy)
I have a kryoflux with 5.25" PC floppy drive and some TD0 images
http://www.retroprograms.com/temp/Osborne_TD0_Disks.zip
I load OSB01_CPM_System.TD0 with HxCFloppyEmulator sofware but I can't export to IPF extension.
(no IPF file is created)
The export works with HFE extension but how write it on a floppy with my kryoflux ?
I have a kryoflux with 5.25" PC floppy drive and some TD0 images
http://www.retroprograms.com/temp/Osborne_TD0_Disks.zip
I load OSB01_CPM_System.TD0 with HxCFloppyEmulator sofware but I can't export to IPF extension.
(no IPF file is created)
The export works with HFE extension but how write it on a floppy with my kryoflux ?
Re: osborne 1
use the kryoflux stream export.number-one wrote: ↑Wed Nov 28, 2018 5:00 pm Hello I want to recreate floppy disk for my Osborne I computer (come without floppy)
I have a kryoflux with 5.25" PC floppy drive and some TD0 images
http://www.retroprograms.com/temp/Osborne_TD0_Disks.zip
I load OSB01_CPM_System.TD0 with HxCFloppyEmulator sofware but I can't export to IPF extension.
(no IPF file is created)
The export works with HFE extension but how write it on a floppy with my kryoflux ?
-
- Posts: 11
- Joined: Wed Nov 15, 2006 11:32 am
Re: osborne 1
Hello, a friend installed on my Osborne 1A an HXC floppy emulator for emulate the 2 floppy drive.
The computer read correctly the floppy HFE image on drive A and B.
But on write the HFE image crash.
The computer read correctly the floppy HFE image on drive A and B.
But on write the HFE image crash.
Last edited by number-one on Sun Sep 01, 2019 3:34 pm, edited 1 time in total.
-
- Posts: 11
- Joined: Wed Nov 15, 2006 11:32 am
Re: osborne 1
HXC B from HXC A copy command
Re: osborne 1
Can you share the formatted hfe ?
Re: osborne 1
use this one instead.
-
- Posts: 1
- Joined: Mon Aug 22, 2022 6:03 am
Re: osborne 1
Should these tips/instructions also work with the new Artery based microprocessor GoTeks?
-
- Posts: 11
- Joined: Wed Nov 15, 2006 11:32 am
Re: osborne 1
Formatting floppy works now by cut the signal 34 of the ribbon.
I want to know if this floppy adapter of the url is working with the original HXC?
https://github.com/WayneVisser/Osborne1FloppyAdapter