Korg Trinity + Gotek with HxC problem

Post Reply
Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Korg Trinity + Gotek with HxC problem

Post by Jeff »

alchemist wrote:
Sat Dec 02, 2017 10:35 pm
Hi Jeff,

I have the same results with the MO jumper set.
Are you waiting some seconds after the image selection ?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Korg Trinity + Gotek with HxC problem

Post by Jeff »

Try this : Make a contact between the S1 jumper and the ground. This will permanently select the gotek (led green always lit) but this have solved this issue with the previous user.

alchemist
Posts: 31
Joined: Wed Nov 29, 2017 9:48 pm
Location: Belgium

Re: Korg Trinity + Gotek with HxC problem

Post by alchemist »

Jeff wrote:
Sun Dec 03, 2017 11:07 am
alchemist wrote:
Sat Dec 02, 2017 10:35 pm
Hi Jeff,

I have the same results with the MO jumper set.
Are you waiting some seconds after the image selection ?
Yes. No action cannot be done (click on file or open the menu), the system says always "medium changed".
Jeff wrote:
Sun Dec 03, 2017 11:45 am
Try this : Make a contact between the S1 jumper and the ground. This will permanently select the gotek (led green always lit) but this have solved this issue with the previous user.
I will try it, but this is not a solution for me. Can't it be done through a software feature?
Could the official HxC drive work? In that case, I will sell my gotek and buy a HxC.
Kind Regards,
Xavier Miller

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Korg Trinity + Gotek with HxC problem

Post by Jeff »

Why this is not a solution ?
I can do this in software, but a small wire is an immediate solution ;)

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Korg Trinity + Gotek with HxC problem

Post by Jeff »

Try this firmware :
https://hxc2001.com/vrac/HxCUSBFEUNGATED.UPD
No jumper needed with this one.

------------------------------------------------------------------------------------------------------------------------------
EDIT : This file can now be generated from the custom firmware page :

https://hxc2001.com/custom_fw/

Set "Non gated mode" and request the firmware (see the last "Build order" section).
------------------------------------------------------------------------------------------------------------------------------

alchemist
Posts: 31
Joined: Wed Nov 29, 2017 9:48 pm
Location: Belgium

Re: Korg Trinity + Gotek with HxC problem

Post by alchemist »

Thank you Jeff, I will try it this evening :)
Kind Regards,
Xavier Miller

alchemist
Posts: 31
Joined: Wed Nov 29, 2017 9:48 pm
Location: Belgium

Re: Korg Trinity + Gotek with HxC problem

Post by alchemist »

Jeff,

IT'S WORKING !!!!

8) 8) 8)

Thank you very much !

Is there a "beer" button, you owe a full pack of it ! :wink:
Kind Regards,
Xavier Miller

Post Reply