Problem with OLED and Gotek
Re: Problem with OLED and Gotek
Btw can you try this ? : switch off the Amiga, keep the Amiga in reset, switch on the Amiga, wait ~5 seconds, remove the gotek reset strap.
Is the screen working in this case ?
Is the screen working in this case ?
Re: Problem with OLED and Gotek
Keep the Amiga or Gotek in reset ?
Re: Problem with OLED and Gotek
Yes/No
Amiga off - Hold Reset on Gotek - Switch on Amiga - in less than 5 sec let go of reset
The OLED is working but the Gotek makes sounds from buzzer like its updating for a few seconds (maybe 15 seconds) and then it works as normal.
Re: Problem with OLED and Gotek
Interesting. If you reduce the reset time (~1 second) is the oled screen still working ?
Re: Problem with OLED and Gotek
Ok, I set the setting on the OLED to 750ms and then Exit
Then Amiga off
Hold Reset on the Gotek
Switch on Amiga while keep holding Reset (Gotek)
Give about 3 seconds and let go
OLED on
ADF boots up normal
Re: Problem with OLED and Gotek
Is this firmware working with the OLED ?
https://hxc2001.com/vrac/HxCUSBFE2.UPD
https://hxc2001.com/vrac/HxCUSBFE2.UPD
Re: Problem with OLED and Gotek
2.5s Delay working!! PerfectJeff wrote: ↑Sat Dec 02, 2017 1:20 amIs this firmware working with the OLED ?
https://hxc2001.com/vrac/HxCUSBFE2.UPD
Thank you so much for your time and patience with this issue
Re: Problem with OLED and Gotek
Ok fine. But i don't like at all the patch to make it work. I recommend you to use the other oled screen.dougal wrote: ↑Sat Dec 02, 2017 9:09 am2.5s Delay working!! PerfectJeff wrote: ↑Sat Dec 02, 2017 1:20 amIs this firmware working with the OLED ?
https://hxc2001.com/vrac/HxCUSBFE2.UPD
Thank you so much for your time and patience with this issue
I have to get one of these "diymore" screen to figure out what is the source of this issue...
Re: Problem with OLED and Gotek
btw i will rename/change the option in the next releases. Let me know if i broke the fix later.
Re: Problem with OLED and Gotek
I think there is a bug
It sometimes says NO USB FOUND and then Reading FAT and again NO USB
Then I tried remove USB and insert again and there is garbage on the OLED and it is making sounds like trying to update
I switched off Amiga and trying again now. So far its working again
It sometimes says NO USB FOUND and then Reading FAT and again NO USB
Then I tried remove USB and insert again and there is garbage on the OLED and it is making sounds like trying to update
I switched off Amiga and trying again now. So far its working again
Re: Problem with OLED and Gotek
So far its all good again
Re: Problem with OLED and Gotek
Yes. Take care with the power supply connector on the gotek : if not connected correctly you can get such "funny" behaviour...
This device and the usb stick are sensitive to any power supply voltage variation made by a bad contact or something else.
Re: Problem with OLED and Gotek
I have fixed some issues + change the oled detection. Let me know if this one is working.
https://hxc2001.com/vrac/HxCUSBFE.UPD
https://hxc2001.com/vrac/HxCUSBFE.UPD
Re: Problem with OLED and Gotek
OLED Init Delay has to be set to 3s and it worksJeff wrote: ↑Sat Dec 02, 2017 4:18 pmI have fixed some issues + change the oled detection. Let me know if this one is working.
https://hxc2001.com/vrac/HxCUSBFE.UPD
Out of the box no oled display unless I set the init delay