Amstrad HxC Software

HxC Floppy Emulator on Amstrad CPC support
Post Reply
UbiAllen
Posts: 4
Joined: Wed Jan 16, 2019 7:51 pm

Amstrad HxC Software

Post by UbiAllen »

Hello and good day,

I have a misunderstanding using the CPC software for the HxC. I downloaded the latest version and successfully flashed it on my rombox. I can start the software with |hxc and the drive is being detected. Then, the directory browsing appears and I can navigate.

According to help, I can select an image by pressing space or enter. Unfortunately, nothing happens when I press these keys. Only a little number in the upper right corner is being incremented by 1 until it reaches 15, then is reset to 01 again after incrementing once more.

How can I select an image in the software?

Again, thanks for your valuable help.

Best regards

Ubi

Tic
Posts: 13
Joined: Mon Aug 01, 2016 9:49 pm

Re: Amstrad HxC Software

Post by Tic »

The numbers are the number of slot where you store the dsk. 1-15.

Then you exit, select one of the 15 slots with the hxc buttons, made a cat and run.

Post Reply