HxC emulator disk image creation

HxC Floppy Emulator on IBM PC and compatible support
Post Reply
FujiMan
Posts: 1
Joined: Wed Jun 12, 2019 2:54 pm

HxC emulator disk image creation

Post by FujiMan »

Hi,
I'm using HxC emulator 2.2.2.1. When I create an Atari ST 720kb MSA image, and load into FloImg 1.02, the disk geometry is 9 sectors per track, 84 cylinders and two sides. Should this be 79 or 80 tracks for ST floppy? When I try to make a physical floppy from image, sometimes I make a bad disk (even with new media). Is there a way to change this or make one with a custom image parameters?
Thanks
FujiMan

Post Reply