Simple Question??

HxC Floppy Emulator on Atari ST support
Post Reply
robf228
Posts: 3
Joined: Sat Sep 04, 2021 10:18 pm

Simple Question??

Post by robf228 »

I have a Lotharek HxC floppy emulator. I had to flash the firmware to HXCFE_V1_8_2_40 to get it to work with HXCSDFE.CFG. My computer is an Atari 1040STe with 1 mb and the HxC is my a: drive.

I can boot into the HxC just fine and select a file using the HxC buttons and all works fine. However, I don't have a clue what to do when I place the autoboot.hfe file on the sd card. The autoboot menu shows up and I try to select a program to run, but I get some sort of empty list folder and don't know what to do from there. I futz around but have had no luck and can find no directions. :cry:

The same thing happens to me when I use a GoTek and flashfloppy.

Please help. Thanks,
Bob

robf228
Posts: 3
Joined: Sat Sep 04, 2021 10:18 pm

Re: Simple Question??

Post by robf228 »

I meant to say

"The same thing happens to me when I use a GoTek and FlashFloppy."

robf228
Posts: 3
Joined: Sat Sep 04, 2021 10:18 pm

Re: Simple Question??

Post by robf228 »

There is some sort of autocorrect getting me. It should say:

"The same thing happens to me when I use a GoTek and Flash-Floppy."

Post Reply