Atari STE OSD

HxC Floppy Emulator on Atari ST support
Post Reply
DeckerZ
Posts: 4
Joined: Sat Feb 22, 2020 2:10 pm

Atari STE OSD

Post by DeckerZ »

I would love to have my Gotek connected internally to my Atari STE and show OSD for my floppy image selections.

I have been reading around both on the forums and Facebook but can't seem to find the connection points.

I read I needed custom firmware and I have done as best as I could as it looks like quite a complicated form to get the correct options. However, it also said it is a three-wire connection, though I cannot find where the three wires are connected on the Atari motherboard.

Any suggestions from someone that has done it and got it working.

Post Reply