However no matter what I do the HXC display is stuck on "hXc" or "000" with either Autoboot or Indexed CFG file. IF it shows "000" i can not change to other disks though, the buttons do nothing. This has never happened to me before? Do i need to reinstall the HXC firmware?
I have tried no jumpers, jumper on S0 only, jumper on S0 and M0, floppy cable flipped both ways, 3 different usb drives (one 2.0, two 3.0)
Any suggestions on what i can do? The drive is flashed with the latest 3.0.8.2a.
Thanks in advance.
With AUTOBOOT cfg - I can open this folder but no others
With INDEXED cfg - I can't open anything
Picture of current drive config