Hi, everyone I am a new user just registered, i received days ago the HxC Floppy Drive Emulator, I want to install it internally on the Amiga 600, I just do not know how to connect the 3 button (Previous,Eject/Select and Next) on the floppy drive emulator, there is a wiring diagram to know how to connect them? here are some picture that I found online of what I make on my A600,
just that the pictures can not understand how they were connected.
https://lh4.googleusercontent.com/-YFPW ... k_0452.jpg
https://lh5.googleusercontent.com/-1nbU ... k_0451.jpg
https://lh3.googleusercontent.com/-VPnj ... k_0445.jpg
https://lh5.googleusercontent.com/-1nbU ... k_0451.jpg
External Button A600
Re: External Button A600
Pin 1 should be connected to all the extra buttons, then follow the pinout in page 26(7.3 User interface) of https://hxc2001.com/floppy_drive_emulat ... Manual.pdf. Does this make sense to you? Haven't got around to doing this on my 1200 yet though... So somebody else can please correct me if I'm totally wrong here!
Re: External Button A600
Yes, I so want to do well, to put the 3 buttons on the A600 outside case, are here but no one helps you ....... I want to play it safe on soldering the wires.
Re: External Button A600
Hi,pdf file does not specify what is required, are you sure that that page?N-Ed wrote:Pin 1 should be connected to all the extra buttons, then follow the pinout in page 26(7.3 User interface) of https://hxc2001.com/floppy_drive_emulat ... Manual.pdf. Does this make sense to you? Haven't got around to doing this on my 1200 yet though... So somebody else can please correct me if I'm totally wrong here!
Re: External Button A600
Yes. As N-Ed said :danko wrote:Hi,pdf file does not specify what is required, are you sure that that page?N-Ed wrote:Pin 1 should be connected to all the extra buttons, then follow the pinout in page 26(7.3 User interface) of https://hxc2001.com/floppy_drive_emulat ... Manual.pdf. Does this make sense to you? Haven't got around to doing this on my 1200 yet though... So somebody else can please correct me if I'm totally wrong here!
1 - VSS (Common to all push button)N-Ed wrote: Pin 1 should be connected to all the extra buttons, then follow the pinout in page 26(7.3 User interface) of https://hxc2001.com/floppy_drive_emulat ... Manual.pdf
7 - BUTTON_DOWN
9 - BUTTON_UP
8 - BUTTON_SELECT
Re: External Button A600
Ok,there are 2 types of contact of Miniature Push Button Switch PTM (push to make) and PTB (push to break), what you need?Jeff wrote:Yes. As N-Ed said :danko wrote:Hi,pdf file does not specify what is required, are you sure that that page?N-Ed wrote:Pin 1 should be connected to all the extra buttons, then follow the pinout in page 26(7.3 User interface) of https://hxc2001.com/floppy_drive_emulat ... Manual.pdf. Does this make sense to you? Haven't got around to doing this on my 1200 yet though... So somebody else can please correct me if I'm totally wrong here!1 - VSS (Common to all push button)N-Ed wrote: Pin 1 should be connected to all the extra buttons, then follow the pinout in page 26(7.3 User interface) of https://hxc2001.com/floppy_drive_emulat ... Manual.pdf
7 - BUTTON_DOWN
9 - BUTTON_UP
8 - BUTTON_SELECT
Last edited by danko on Sat Dec 22, 2012 1:14 pm, edited 1 time in total.
Re: External Button A600
The classical : Push Button Switch PTM (push to make)danko wrote:
Ok,there are 2 types of contact of Miniature Push Button Switch PTM (push to make) and PTB (push to break), what you need?
Re: External Button A600
Yay, this is like the first time I actually understood what needed to be done solder wise to make something work hehe
Now I just have to be brave and start cutting into my beloved A1200 case, that's way more scary than doing the soldering
Now I just have to be brave and start cutting into my beloved A1200 case, that's way more scary than doing the soldering
Re: External Button A600
other possible choice : cutting nothing and just use the file selectorN-Ed wrote:Yay, this is like the first time I actually understood what needed to be done solder wise to make something work hehe
Now I just have to be brave and start cutting into my beloved A1200 case, that's way more scary than doing the soldering
Re: External Button A600
Yes but using the buttons is easier in my setup, never really liked the software file selector. <-- But I like that it's at least an option, this gear is great. Best new gear for my Amiga, next to the brand spanking new Indivision AGA MK2 that is
When I'm all done installing this I will make a really easy to follow instruction on how to do this to a Amiga 1200, might be a good sticky here at the forum!
When I'm all done installing this I will make a really easy to follow instruction on how to do this to a Amiga 1200, might be a good sticky here at the forum!