Gotek and 16x2 display firmware issues

HxC Floppy Emulator on Amiga support
Post Reply
Arioch1973
Posts: 2
Joined: Sat Jan 28, 2023 12:53 pm

Gotek and 16x2 display firmware issues

Post by Arioch1973 »

I am using a Gotek (STM32 based) for my Amiga 1200. I have a 16x2 i2c connected display connected to the i2c port. On firmware HXCFEUSB_HFE_V3_0_8_2a.upd the display works and shows information. However, since I upgraded the firmware to HxCFEUSB_V5_1_2_1a.UPD, the display no longer shows any information. I have to reconnect the 3x7 segment LED display to see any info at all. How can I get the latest firmware to work with the 16x2 display?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek and 16x2 display firmware issues

Post by Jeff »

Arioch1973 wrote:
Sat Jan 28, 2023 12:58 pm
I am using a Gotek (STM32 based) for my Amiga 1200. I have a 16x2 i2c connected display connected to the i2c port. On firmware HXCFEUSB_HFE_V3_0_8_2a.upd the display works and shows information. However, since I upgraded the firmware to HxCFEUSB_V5_1_2_1a.UPD, the display no longer shows any information. I have to reconnect the 3x7 segment LED display to see any info at all. How can I get the latest firmware to work with the 16x2 display?
Hello,

I am working on the issue.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek and 16x2 display firmware issues

Post by Jeff »

Attached a first version fixing the 16x2 lcd support.
Attachments
HxCUSBFE.UPD
(88 KiB) Downloaded 53 times

Arioch1973
Posts: 2
Joined: Sat Jan 28, 2023 12:53 pm

Re: Gotek and 16x2 display firmware issues

Post by Arioch1973 »

Thank you very much :)

Post Reply