LCD 2004 Support and Rotary Encoder

HxC Floppy Emulator on Amiga support
Post Reply
Cihan
Posts: 1
Joined: Sun Mar 20, 2016 10:24 pm

LCD 2004 Support and Rotary Encoder

Post by Cihan »

I have a Gotek with a 3 digit 7 Seg Display and 2 Buttons.

Is it possible to use an 2004 LCD. I atteched and it worked, but no use of the more available space.
And how about the current? Is it enough? Because after a minute the contrast of the display wents away, like its dying in the moment.
I put off the Amiga to avoid damage. First thought was that I made a mistake with the wiring.

And can I use a Rotary Encoder instead of the buttons?

Like Left Right S3 S4 and push button JA?
It would great with a big Display for the Images and a Rotary Encoder to select it.


Greets from Germany.

danko
Posts: 25
Joined: Fri Apr 27, 2012 6:29 pm
Location: Italy

Re: LCD 2004 Support and Rotary Encoder

Post by danko »

Hi,the HxC firmware support the LCD 20x4 display?

Jeff
Site Admin
Posts: 7301
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: LCD 2004 Support and Rotary Encoder

Post by Jeff »

danko wrote:
Thu Oct 08, 2020 11:31 am
Hi,the HxC firmware support the LCD 20x4 display?
yes

danko
Posts: 25
Joined: Fri Apr 27, 2012 6:29 pm
Location: Italy

Re: LCD 2004 Support and Rotary Encoder

Post by danko »

Ok,also compatible with this OLED 128x64 I2C SPD0301
Attachments
back.jpg
back.jpg (154.27 KiB) Viewed 267 times
front.jpg
front.jpg (104.82 KiB) Viewed 267 times

Jeff
Site Admin
Posts: 7301
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: LCD 2004 Support and Rotary Encoder

Post by Jeff »

danko wrote:
Thu Oct 08, 2020 12:35 pm
Ok,also compatible with this OLED 128x64 I2C SPD0301
Yes 128x64 screens are supported. You can change/select the screen model on this page : https://hxc2001.com/custom_fw/

Post Reply