Serial Bridge COM access error !

Post Reply
senordelgado
Posts: 2
Joined: Sat Nov 05, 2022 6:17 pm

Serial Bridge COM access error !

Post by senordelgado »

Hi, I'm having trouble getting the Serial Bridge to connect to my Gotek.

I just get " COMxx access error ! " every time unless I connect through COM1 which is not the the TTL cable.

I have followed the instructions, the TX/RX etc connected up. If I power up the Gotek without the J3 header fitted and a serial monitor running, I can get "> Host Library V1.0.0 Initialized" to print so I'm assuming that I have things wired correctly.

I have tried a few different cables and have verified on my scope that they are working.

I'm on windows 10 if that makes a difference. I have tried running the app as administrator and also running it in various compatibility modes, but still no joy.


Does anyone have any ideas for something I might have missed?

Many thanks

senordelgado
Posts: 2
Joined: Sat Nov 05, 2022 6:17 pm

Re: Serial Bridge COM access error !

Post by senordelgado »

OK i managed to get it sorted by using the offline USB A to USB A method.

I guess i must have a dodgy RX pin on my gotek possibly.

Post Reply