Firmware Too Old

Post Reply
supercruiser
Posts: 2
Joined: Thu Aug 12, 2021 10:14 am

Firmware Too Old

Post by supercruiser »

Hi.

Had heaps of issues trying to do the original flashing process.

It can see it in the com port, connection to the HXC Serial bridge is up.

Then i get "Serial Bridge is Too Old" - download a new version, which i have done.

Does it mean that the serial adapter which is one of these:

https://core-electronics.com.au/usb-to- ... Y4QAvD_BwE

Is this more than likely software or the Serial device..

Any help appreciated

CHeers
CM

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Firmware Too Old

Post by Jeff »

This means that you need to update the software :

https://hxc2001.com/download/floppy_dri ... Bridge.zip

supercruiser
Posts: 2
Joined: Thu Aug 12, 2021 10:14 am

Re: Firmware Too Old

Post by supercruiser »

Hi

Yes i have downloaded the latest and i am still getting the too old error, so was wondering if this has come up anywhere else??

Cheers

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Firmware Too Old

Post by Jeff »

supercruiser wrote:
Sun Oct 03, 2021 8:50 am
Hi

Yes i have downloaded the latest and i am still getting the too old error, so was wondering if this has come up anywhere else??

Cheers
Then this means that you have a network issue. Please contact me by email to use an alternate flash method.

Post Reply