ZSK MSC support

Post Reply
vinibali
Posts: 1
Joined: Sat Feb 20, 2021 8:12 am

ZSK MSC support

Post by vinibali »

Hello there!

I've got a Gotek SFRC922D with U00126F01 firmware on board. Do you know somebody who is using it on an older embroidery machine with the factory fw? I have been trying to make it work with different jumper settings, but without any success.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: ZSK MSC support

Post by Jeff »

vinibali wrote:
Sat Feb 20, 2021 8:37 am
Hello there!

I've got a Gotek SFRC922D with U00126F01 firmware on board. Do you know somebody who is using it on an older embroidery machine with the factory fw? I have been trying to make it work with different jumper settings, but without any success.
You can Install the HxC firmware :

https://hxc2001.com/store
https://hxc2001.com/docs/gotek-floppy-e ... -firmware/

Then i will be able to provide you the files for this machine.

Post Reply