Dynacord ADS Sampler DD image incompatibility

Post Reply
agent29
Posts: 67
Joined: Sun May 08, 2016 10:42 am

Dynacord ADS Sampler DD image incompatibility

Post by agent29 »

Hi

I have a Gotek with the latest FW. It will Format the "Dynacord HD 1.6MB" image exported as *.hfe and the sampler verifies the image. This sampler is reported to read AKAI S900 disks which I cannot seem to read. Both HD and DD Akai s900 s950 images exported as "hfe" are reported as "unreadable" by the Dynacord ADS.

I have attempted to format both HD and DD Akai images, the HD "hfe" formatted and verified ok however the DD "hfe" reports directory errors directly after a format attempt?

attached are the format attempts, can anyone assist?
Attachments
Dynacord ADS format attempts.zip
(185.78 KiB) Downloaded 79 times

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Dynacord ADS Sampler DD image incompatibility

Post by Jeff »

You probably need to force the interface mode to another mode. These images use the S950 DD / HD modes.
You can change this in the emulator's internal menu. Try the Shugart mode :

https://hxc2001.com/docs/gotek-floppy-e ... e_settings

Post Reply