PSR 9000 and i have replaced the Floppy Drive with a Gotek USB emulator

Post Reply
massimona
Posts: 4
Joined: Tue Nov 03, 2020 7:52 pm

PSR 9000 and i have replaced the Floppy Drive with a Gotek USB emulator

Post by massimona »

Hello, I have a PSR 9000 and i have replaced the Floppy Drive with a Gotek USB emulator... this is where i am lost now. I have formatted the USB with the included software and i have fomatted anothr drive doing it directly form the emulator by pressing both buttons. Once formatted the USB stick says its only 1.44mb from what I understand once you fornat the USB stick its supposed to have 100 partions?? how to I add Midi files in those partitions? and how do I access those partiotions? Thank you in advance for your advice

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: PSR 9000 and i have replaced the Floppy Drive with a Gotek USB emulator

Post by Jeff »

Is the HxC firmware installed on this Gotek ?

massimona
Posts: 4
Joined: Tue Nov 03, 2020 7:52 pm

Re: PSR 9000 and i have replaced the Floppy Drive with a Gotek USB emulator

Post by massimona »

I am not sure if it came from factory already installed, it did come with a small CD and I thought that was to format any USB stick

massimona
Posts: 4
Joined: Tue Nov 03, 2020 7:52 pm

Re: PSR 9000 and i have replaced the Floppy Drive with a Gotek USB emulator

Post by massimona »

The Gotek reads my USB stick however when I format it instead of being a 2gb stick it becomes a 1.4mb I am confuded on how to make the USB stick formatted in to 100 partions?? i think that is what i am supposed to do.. is that correct?

Post Reply