Everything went really smooth initially setting up my new Gotek until...
Went thru the whole process of loading the HxC code onto my GoTek. I get to the step where the display shows "Ldr". Copied the latest UPD file to a USB stick and after a few seconds I get the 003 Error (FAT Error). I tried 4 different USB sticks of various sizes, All FAT32 except one which was FAT. All are showing the same error 3.
Any suggestions?? Thanks in advance!
Ed
Error 3 when for initial flash
Re: Error 3 when for initial flash
Mac user i suppose ? if so set the "Master Boot Record" option when you format the stick.eddieb76 wrote: ↑Sat Jun 06, 2020 5:57 amEverything went really smooth initially setting up my new Gotek until...
Went thru the whole process of loading the HxC code onto my GoTek. I get to the step where the display shows "Ldr". Copied the latest UPD file to a USB stick and after a few seconds I get the 003 Error (FAT Error). I tried 4 different USB sticks of various sizes, All FAT32 except one which was FAT. All are showing the same error 3.
Any suggestions?? Thanks in advance!
Ed
Re: Error 3 when for initial flash
I did see that I had to set drive as MBR. In Windoze, I ended up having to use DISKPART to convert the type to MBR, then format, etc. Had some strange problem on my one pc, but I was able to format and copy the UPD file on to it. Still got the 003 Error. I'll try again. Thanks
Re: Error 3 when for initial flash
Then try another usb stick... Definitively the emulator doesn't recognize the partition/disk format for some reasons.eddieb76 wrote: ↑Sun Jun 07, 2020 5:43 amI did see that I had to set drive as MBR. In Windoze, I ended up having to use DISKPART to convert the type to MBR, then format, etc. Had some strange problem on my one pc, but I was able to format and copy the UPD file on to it. Still got the 003 Error. I'll try again. Thanks