Hi all,
I'm a complete noob with a Gotek that I bought from amigastore.eu, with rotary encoder, OLED and buzzer fitted.
I've updated the firmware to v3.4.14.1a and am running a A1200
I used the autoboot selector and configured the setting unload at power on and saved. Now I can't insert an adf or hfe. No combination of button pressing either on the 2 buttons or the rotary button will insert an image. All I see is disk ejected underneath the file name that I selected.
I can fix it by putting a clean config file on the USB stick, but how do I not have a floppy mounted at boot time. AKA I want to boot to harddisk?
Sorry if this has been covered before.
Thanks
Mick
Eject at power on problem
Re: Eject at power on problem
First question : Do you really want to use the autoboot selector ? Since you have the oled screen this is not needed.mickoz wrote: ↑Sat May 09, 2020 8:13 amHi all,
I'm a complete noob with a Gotek that I bought from amigastore.eu, with rotary encoder, OLED and buzzer fitted.
I've updated the firmware to v3.4.14.1a and am running a A1200
I used the autoboot selector and configured the setting unload at power on and saved. Now I can't insert an adf or hfe. No combination of button pressing either on the 2 buttons or the rotary button will insert an image. All I see is disk ejected underneath the file name that I selected.
I can fix it by putting a clean config file on the USB stick, but how do I not have a floppy mounted at boot time. AKA I want to boot to harddisk?
Sorry if this has been covered before.
Thanks
Mick
To eject/insert a disk, press both buttons in the same time.
Re: Eject at power on problem
Hey Jeff, thanks for replying
That doesn’t seem to work. Still get disk ejected no matter the combination of buttons pressed
That doesn’t seem to work. Still get disk ejected no matter the combination of buttons pressed
Re: Eject at power on problem
One note : you need to press both buttons some seconds (at least 2 or 3 seconds)
Re: Eject at power on problem
That did the trick. I told you I was a noob.
Thanks Jeff
Thanks Jeff