Gotek in industrial applicattion

Post Reply
NelsonZ
Posts: 12
Joined: Fri Jun 28, 2019 1:49 am

Gotek in industrial applicattion

Post by NelsonZ »

Hi Jean

I have an application where an industrial machine use a floppy drive 5.25 360kb to read the program and a PC computer with a floppy drive 5.25 1.2Mb to write the program. I Wana use two Gotek with 7 segments display. One for machine and other for computer. The diskette is formatted as 320kb to transfer the program. As the original ones have different bit rate and rotation speed there is a way to configure the Goteks for this application?

Nelson

Post Reply