flashing issue

Post Reply
s219800
Posts: 4
Joined: Mon Feb 18, 2019 1:25 pm

flashing issue

Post by s219800 »

Hello, I have tried flashing a couple gotek with the HxC software and all went fine, but this time when I get to the part where I insert the USB stick for the software when the LDR screen is on, i get a flashing 004 message (flashes 4 times then pauses for 2 seconds).

This gotek is in an akai S950 right now. I have tried using the indexed mode and i get that error, tried the S950 config mode to no avail, I tried flipping the cable, I tried putting a jumper on s0 and tried without jumper.

I am using a FAT32 formatted usb micro stick with only the .CFG file on it


What am I doing wrong?

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: flashing issue

Post by Jeff »

Copy the latest upd file to the stick to finish the firmware installation.

s219800
Posts: 4
Joined: Mon Feb 18, 2019 1:25 pm

Re: flashing issue

Post by s219800 »

oh yeah! worked as a charm


thanks jeff!

darq82
Posts: 3
Joined: Mon Sep 07, 2020 7:10 pm

Re: flashing issue 003/004

Post by darq82 »

Hi Jeff,

After uploading version 3.5.2.5.a, the 004 message appeared, then I tried with a few older versions and 003 was displayed.

Can you please help?

Thank you,
Darek

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: flashing issue 003/004

Post by Jeff »

darq82 wrote:
Fri Mar 12, 2021 1:52 pm
Hi Jeff,

After uploading version 3.5.2.5.a, the 004 message appeared, then I tried with a few older versions and 003 was displayed.

Can you please help?

Thank you,
Darek
Retry with another USB stick and power supply.

darq82
Posts: 3
Joined: Mon Sep 07, 2020 7:10 pm

Re: flashing issue

Post by darq82 »

Retry with another USB stick and power supply.
Everything is fine, thanks a lot!

Post Reply