Serial Bridge does not detect gotek

Secret_Oreo
Posts: 25
Joined: Sat Oct 26, 2019 12:06 am

Re: Serial Bridge does not detect gotek

Post by Secret_Oreo »

I will get back to you regarding presets as I haven't checked that side out yet. I'll get some modulation going in chords and see how she is with that ☺.

So far so good mate. Going into disk menu was quick also fyi. πŸ˜€

Secret_Oreo
Posts: 25
Joined: Sat Oct 26, 2019 12:06 am

Re: Serial Bridge does not detect gotek

Post by Secret_Oreo »

Jeff wrote: ↑
Tue Nov 19, 2019 4:54 pm
Ok then lets restart from the beginning.

Remove all files from your stick.
Unpack the files from the attached zip file.

- format each images ! (none are formatted).
- Post back them here !
- Try to save multi disk sample.

Note : wait 4 seconds before accessing the disk after changing the disk number, the auto select delay may be the issue.
e6400_test3.zip

Regarding the read speed this is probably a gap3 parameter setting issue. i will check this and come back to you with something to try.
Update:

Only just had time to load a few samples and make big patches using chords. Saving both short and long samples gave reasonable preset save/load times to previous times recorded. Some longer than others but obviously due to length of sample and amount of modulation.

So I would say all is well! πŸ‘πŸΎ

Do you have a tutorial for changing existing floppies to DSK.... images please? (IPF Converter?) πŸ€”

Just want to say thank you for your time and effort for all of this Jean!! 🍻

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Serial Bridge does not detect gotek

Post by Jeff »

Secret_Oreo wrote: ↑
Sun Dec 01, 2019 4:27 pm
Do you have a tutorial for changing existing floppies to DSK.... images please? (IPF Converter?) πŸ€”
Which computer able to read a floppy disk have you ?
Secret_Oreo wrote: ↑
Sun Dec 01, 2019 4:27 pm
Just want to say thank you for your time and effort for all of this Jean!! 🍻
Thanks ! :D

Post Reply