Roland MC-50 HxC Stuck in setup menu.

HxC Floppy Emulator Roland Samplers/Keyboards support
Post Reply
Andympeck
Posts: 10
Joined: Fri Feb 14, 2020 5:37 pm

Roland MC-50 HxC Stuck in setup menu.

Post by Andympeck »

Hello. I have installed a Gotek SFR1M44-U100K. The firmware has been flashed successfully to V3_4_10_10a.

When I switch the unit on, it displays HxC, and then it appears to be stuck in the setup menu - 0 flashes, and then the setting of item 0 (19 - Roland, in my case).

I can increment the menu item numbers, and adjust the settings, but when I switch off, it simply comes back to the same menu. How do I get out of the menu, please. Also, how do I format the USB stick into sets of discs for the MC-50?

Thankyou in advance...

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Roland MC-50 HxC Stuck in setup menu.

Post by Jeff »


Post Reply