Roland S-550 issues

HxC Floppy Emulator Roland Samplers/Keyboards support
Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Roland S-550 issues

Post by Jeff »

nutjob wrote:
Sun Feb 14, 2021 12:54 am
Rev F from Lotharek. Firmware v1.8.2.40
Please send me the hfe by email : hxc2001 at hxc2001 dot com

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Roland S-550 issues

Post by Jeff »

nutjob wrote:
Thu Feb 04, 2021 11:46 am
By necessity I am using this image as it is the only one that supports additional SCSI hard disks and CD ROMs. It totally works - its just that I need to reselect the disk image on the front panel of the HxC twice through the boot process. I don't have this problem when I write the image to an actual floppy.
Fixed by email. The image/emulator wasn't in Shugart interface mode but it was wrongly set in PC interface mode.

Late Bloomer
Posts: 7
Joined: Sat Dec 24, 2022 8:19 am

Re: Roland S-550 issues

Post by Late Bloomer »

Could you also post what system the Roland G-800 uses and a link to updating the relevant firmware..i have been floundering around for days trying to get my Roland to recognize my Gotek which is flashed and showing FF but keeps showing E3..thanks!

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Roland S-550 issues

Post by Jeff »

Late Bloomer wrote:
Thu Jan 19, 2023 9:43 am
Could you also post what system the Roland G-800 uses and a link to updating the relevant firmware..i have been floundering around for days trying to get my Roland to recognize my Gotek which is flashed and showing FF but keeps showing E3..thanks!
This is this firmware :
https://hxc2001.com/store/

Late Bloomer
Posts: 7
Joined: Sat Dec 24, 2022 8:19 am

Re: Roland S-550 issues

Post by Late Bloomer »

Thank you Jeff! :D

Post Reply