Roland Atelier at90s organ

HxC Floppy Emulator Roland Samplers/Keyboards support
Post Reply
Fchazz
Posts: 3
Joined: Wed May 19, 2021 2:10 pm

Roland Atelier at90s organ

Post by Fchazz »

Has anyone on here had success with installing a gotech into a Roland Atelier at90s organ?

Jeff
Site Admin
Posts: 7638
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Roland Atelier at90s organ

Post by Jeff »

Fchazz wrote:
Wed May 19, 2021 3:20 pm
Has anyone on here had success with installing a gotech into a Roland Atelier at90s organ?
SD HxC and Gotek HxC floppy emulator drives work with the Roland Atelier at90s.

Fchazz
Posts: 3
Joined: Wed May 19, 2021 2:10 pm

Re: Roland Atelier at90s organ

Post by Fchazz »

I have installed a gotek with HxC bootloader and firmware. The jumper is on S1. The organ can read from the stick just fine. When I try to save a set of registrations to a blank floppy image I get "unknown disk". When I try to have the organ reformat one of the blank floppies, I get "disk ejected".
Any suggestions?

Fchazz
Posts: 3
Joined: Wed May 19, 2021 2:10 pm

Re: Roland Atelier at90s organ

Post by Fchazz »

Solved, thanks Jean-François.

Post Reply