LOTHAREK HXC SD MAX - AKAI S3000 JUMPERS

HxC Floppy Emulator Akai Keyboards/Samplers support
Post Reply
ARK4N0ID
Posts: 2
Joined: Thu Dec 24, 2020 12:22 am

LOTHAREK HXC SD MAX - AKAI S3000 JUMPERS

Post by ARK4N0ID »

hey everybody

i am quite lost atm with the jumpers on Lotharek hxc sd max version
i tried to make things cheaper and got this version where i found no reference..
any clue would be very appreciated : -)

ps. i will post jumpers config as soon as i get them working
off topic: yeah right now it is 24.12 18:55.. i am studing and as soon as i get some holidays i go into this things \oo/
Attachments
jumpers-settings.jpg
jumpers-settings.jpg (94.9 KiB) Viewed 2503 times
IMG_1884 copy.jpg
IMG_1884 copy.jpg (194.45 KiB) Viewed 2503 times
IMG_1888 copy.jpg
IMG_1888 copy.jpg (178.45 KiB) Viewed 2503 times

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: LOTHAREK HXC SD MAX - AKAI S3000 JUMPERS

Post by Jeff »

Reconnect the floppy ribbon to the other way.

ARK4N0ID
Posts: 2
Joined: Thu Dec 24, 2020 12:22 am

Re: LOTHAREK HXC SD MAX - AKAI S3000 JUMPERS

Post by ARK4N0ID »

Thank You.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: LOTHAREK HXC SD MAX - AKAI S3000 JUMPERS

Post by Jeff »

(explanation : The permanent "RA" and "S:1" text on the second line indicate that the floppy ribbon is not connected properly : all the floppy signals are shorted to the VSS/ground)

Post Reply