http://www.youtube.com/watch?v=OKYu-j7A ... ture=g-upl
It works! Another success!
On a side note gentlemen, I thought it would be worthy to mention that the mounting holes in the HXC bracket seem to be about 1/2 to 1cm off from most of my samplers so, the unit protrudes a bit. I can carefully drill new holes on my unit but I thought I should mention it just in case you wanted to modify or add it to future designs.
Prophet 2002 + HXC working video
Re: Prophet 2002 + HXC working video
Hello, I've contact you with youtube, but this forum is more appropriate.
I've installed a Hxc in my p2002.
I've format an sd card in fat32 and copy some patch in .hfe format and also I copied the .cfg.
I do have the patch name on the screen.
But no transfer is happening when I put the p2002 on, I've also tried "Load one sound", no transfer...
Could you help me ?
Best regards
Cristo
I've installed a Hxc in my p2002.
I've format an sd card in fat32 and copy some patch in .hfe format and also I copied the .cfg.
I do have the patch name on the screen.
But no transfer is happening when I put the p2002 on, I've also tried "Load one sound", no transfer...
Could you help me ?
Best regards
Cristo
- Attachments
-
- IMG_3594 a.jpg (209.14 KiB) Viewed 9923 times
-
- IMG_3592 a.jpg (193.23 KiB) Viewed 9923 times
-
- IMG_3590 a.jpg (208.2 KiB) Viewed 9923 times
Re: Prophet 2002 + HXC working video
Issues fixed, it works !
Regards
Regards
Re: Prophet 2002 + HXC working video
Yes. Set the jumper to ID0-A and it worksalkristo wrote:Issues fixed, it works !
Regards