Sequencial Circuits Studio 440

HxC Floppy Emulator Sequential Prophet Keyboards support
Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Sequencial Circuits Studio 440

Post by Jeff »

Mix-club wrote:well after many tries i found out that you should use the A drive only .
i dont know if it really makes a difference but for sure the HXC will not load files above 2.00 mo otherwise this error message appear .
Yes the Studio 440 use DD floppies.

Fimage
Posts: 1
Joined: Mon Mar 27, 2023 12:35 am

Re: Sequencial Circuits Studio 440

Post by Fimage »

Mix-club wrote:
Fri May 26, 2017 9:45 am
well after many tries i found out that you should use the A drive only .
i dont know if it really makes a difference but for sure the HXC will not load files above 2.00 mo otherwise this error message appear .
Hello Mix-club, Could you please tell exactly how you did setup the dip-switches as i have the same problem?

So far i am only able to save/load using this image provided by Lotharek; S-440-WaldKitFx1.hfe

Any other gives the error.

(i have updated the firmware and tried different dip switch settings,but no luck)

Thank you very much.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Sequencial Circuits Studio 440

Post by Jeff »

What are you trying to do ?

Post Reply