The HxC Floppy Emulator working with a Morbidelli Author 510 wood working machine
https://hxc2001.com/showroom/HxC_Floppy_ ... r_510.html
The Floppy disk drive of this Morbidelli Author 510 Wood working CNC machine was successfully replaced by an HxC Floppy Emulator.
- Original floppy disk drive was analyzed and backuped by the HxC Floppy Emulator software.
- DOS type images are managed with the HxC Floppy Emulator DOS Disk Browser.
The HxC Floppy Emulator working with a Morbidelli Author 510
Re: The HxC Floppy Emulator working with a Morbidelli Author
Hello Jeff . Thanks for all the support you give to users.
I'm thinking of buying a HxC Rev F for Morbidelli Author 510, the floppy drive is not working properly . Buying this takes some kind of special physical configuration , as jumper or welds ??
You can guide me a little please ??
Thank you very much !!
I'm thinking of buying a HxC Rev F for Morbidelli Author 510, the floppy drive is not working properly . Buying this takes some kind of special physical configuration , as jumper or welds ??
You can guide me a little please ??
Thank you very much !!
Re: The HxC Floppy Emulator working with a Morbidelli Author
Just replace the drive, copy some files to an sdcard, and you are ready
The switch setting should be ID0-A.
The switch setting should be ID0-A.