Oxford electron microscopy

Post Reply
mrdavoudi1
Posts: 2
Joined: Sat Dec 21, 2013 11:48 am

Oxford electron microscopy

Post by mrdavoudi1 »

Dear Jeff

Hi

I have OXFORD electron mycroscope and need to replace teac fd235hf drive.

I dumping the floppy with DSK2FDI program and it tell me double sided 18 sec/track and 512 byte /sec with 80 track.

But tell me side1 on track0 have 18 bad sector!!

I dump the floppy with hxc software.

When it reached track 0 side 1, one moment the bitrate change from 500 kbit/sec to 1000 kbits/sec and don't say any bad sector.

But in dump file there were no symptom of track 1 head 0  bytes.

Means the software does not read this track.

Can u help me what it mean?

A protected floppy?

How can i dump it ?

With what software or hardware?

In what format I Must export it?(hfe v3)?

This is the  image map of dump file.

If it need i send you the dump file.


I forgot to say that if you look at the number of sectors at the end of the work (photo uploaded ) there is exactly 18 sectors deficit  .The number of track 0 head1 sectors . Without announcing any bad sectors.

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Oxford electron microscopy

Post by Jeff »

Only a stream dump analysis can help to answer to all these questions.

Post Reply