Charmilles Roboform 22 EDM

Post Reply
skippysmt
Posts: 7
Joined: Thu Aug 02, 2018 11:11 pm

Charmilles Roboform 22 EDM

Post by skippysmt »

Hello Again Jeff I Need some help please
I’m converting a RoboForm 22 that save to a disk, programmes and also has 3 software disk that need to read back into the machine if it crashes or the battery go flat.

I have done two latter machine and they work just fine.

I have copied all the disk with Kryoflux and have images of all 4 disk.
I can see all the files on the disk browser software fine when I put them in the machine I get a disk fault "directory not initialised” most of the time. I think it pin/software setting fault.

If I try and format the disk if formats all 80 sector then it does what I think is a disk search and comes up with no floppy fault.
The floppy drive in this machine is an fd235hf-a529 and I have sent you a photo of the pin setting to your FTP server and a date sheet for the drive.
It’s using pin 2 as disk change and 34 as ready and is set for DS0 but I think it could be using another pin also.

I have tried using custom setting but cannot find any information on what the difference is between disk changes 1, 2, 3 in yours new software. Is there a new up dated manual coming soon as there is a lot of new function now but no documents how to use them.

I await your help Skippy.

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Charmilles Roboform 22 EDM

Post by Jeff »

Can you dump the disks with the kryoflux with the preservation raw format (*.raw) ? According to the dtc logs some sectors was bad...

skippysmt
Posts: 7
Joined: Thu Aug 02, 2018 11:11 pm

Re: Charmilles Roboform 22 EDM

Post by skippysmt »

i will do it this week as been overloaded with work

skippysmt
Posts: 7
Joined: Thu Aug 02, 2018 11:11 pm

Re: Charmilles Roboform 22 EDM

Post by skippysmt »

Uploaded the raw files for you to have a look at thank you

skippysmt
Posts: 7
Joined: Thu Aug 02, 2018 11:11 pm

Re: Charmilles Roboform 22 EDM

Post by skippysmt »

jeff have you had a chance to look at the files

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Charmilles Roboform 22 EDM

Post by Jeff »

skippysmt wrote:
Tue Feb 12, 2019 9:58 pm
jeff have you had a chance to look at the files
no not yet.

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Charmilles Roboform 22 EDM

Post by Jeff »

The images are perfects.
You can get the converted images into the dump samheath/rob22.zip file on the ftp server.

Nephor
Posts: 1
Joined: Thu Mar 11, 2021 3:57 pm

Re: Charmilles Roboform 22 EDM

Post by Nephor »

Hi,
Sorry for offtopic, but I see, that you had been using (hope, that you still have) Roboform 22.
We have this machine for some time, but I think I don't have some technology files.
I there any chance, that you have copy of those, and you can send me them? Mainly I need CUAC/UCUAC.TEC

I'll be very grateful.

Best regards,
Sebastian.

Post Reply