Japax EDM pc9801v

Post Reply
skippysmt
Posts: 7
Joined: Thu Aug 02, 2018 11:11 pm

Japax EDM pc9801v

Post by skippysmt »

I done one of these machines about 5 years ago and i can remember how to copy the 3.5 floppy disk to make the image

its a pc9801v nec

can some one tell me the steps to copy the disk again.

i have a 3 mode floppy drive on my windows 7 machine and using the software but keep getting a blank image.
is their a special floppy drive to use or is it the setting that is wrong

also looking for a vfo board have emailed the guy in Japan but had no answer is their some one else that makes them please

skippysmt
Posts: 7
Joined: Thu Aug 02, 2018 11:11 pm

Re: Japax EDM pc9801v

Post by skippysmt »

I have now got a kryoflux board to copy the disk as I was told this was the only way to copy pc9801 disc

Can someone help me with some sort of setting to use or a procedure please?

Jeff
Site Admin
Posts: 8091
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Japax EDM pc9801v

Post by Jeff »

skippysmt wrote:
Sat Aug 18, 2018 7:44 pm
I have now got a kryoflux board to copy the disk as I was told this was the only way to copy pc9801 disc

Can someone help me with some sort of setting to use or a procedure please?
Make stream preservation dump and share it. i will convert the image for you.

Post Reply