Arburg Multronica

Post Reply
madzag1
Posts: 1
Joined: Thu Oct 14, 2021 6:25 pm

Re: Arburg Multronica

Post by madzag1 »

Hello.

Sorry for writing about Dialogica Control, but do you have any idea?

Arburg 420C with Dialogica control forgot everything, only the 'boot loader' can be read on the screen. I have the programme and system disks. After I put the disks into it, it happens nothing. How can I start the disk reading? I tried to hold the button 'y' and turn on the machine. In spite of this, happens nothing.

Thank you for your answers

The machine is like on the link:
https://unimachines.hu/m%C5%B1anyag-fr% ... -9190.html

stilpenza
Posts: 5
Joined: Mon Apr 25, 2022 3:45 pm

Re: Arburg Multronica

Post by stilpenza »

Hello.

My name is Kondrashov Anton. I write you from Russia, so sorry for my English.

I have an injection moulding machine Arburg and I need to change floppy drive to usb floppy emulator.

I bought a usb floppy emulator Gotek, mounted it into the machine. The machine did not see my usb stick with the data from your site. After that I moved the jumper from position "S1" to "S0" (https://hxc2001.com/download/floppy_dri ... upport.htm). After it the machine burned 2 my usb sticks, which I put into usb emulator.

Could you help me? What did I do wrong?

Thank you.

ulli27
Posts: 2
Joined: Tue Jan 04, 2022 6:51 pm

Re: Arburg Multronica

Post by ulli27 »

Which Arburg type is it?

spagagz
Posts: 4
Joined: Sat Nov 23, 2019 12:39 am

Re: Arburg Multronica

Post by spagagz »

Hi Jeff and the rest of the team.
My name is Nedeljko and i am from Bosnia.
I have a problem with the Multronica control. My system disks are faulty. I contacted Arburg and they no longer have floppy disks and offer an emulator on a CF card.The emulator is CFF011, with it they sent an erprom with a different serial number. With the new eprom, there are no graphics at all. Now Arburg says that you need to buy a new CPU. That is already not profitable.After researching, I saw the mistake they made. They put the SW in 256 eprom, and my CPU uses 128 eprom. I tried to change the serial number in the eprom in my original SW located at address 002ff0, however the system from the emulator does not boot. Faulty diskette. Do you have any idea how to solve the problem?
Thanks in advance.

spagagz
Posts: 4
Joined: Sat Nov 23, 2019 12:39 am

Re: Arburg Multronica

Post by spagagz »

I should also say that I have another HxC emulator and I tried the files from your site, and I can't boot the system, it still shows the wrong diskette. I don't have Kryoflux to read my disks. Any help is welcome. Thanks.

Jeff
Site Admin
Posts: 7937
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Arburg Multronica

Post by Jeff »

spagagz wrote:
Sun Nov 13, 2022 12:36 pm
I should also say that I have another HxC emulator and I tried the files from your site, and I can't boot the system, it still shows the wrong diskette. I don't have Kryoflux to read my disks. Any help is welcome. Thanks.
Hello,

I can read the disks for you. Contact me to hxc2001 at hxc2001 dot com .

spagagz
Posts: 4
Joined: Sat Nov 23, 2019 12:39 am

Re: Arburg Multronica

Post by spagagz »

Hallo mr.Jeff!
I sent you an email, but I have no reply. Is the correct email hxc2001 hxc2001 com
Thank you.

Jeff
Site Admin
Posts: 7937
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Arburg Multronica

Post by Jeff »

spagagz wrote:
Wed Nov 23, 2022 11:10 pm
Hallo mr.Jeff!
I sent you an email, but I have no reply. Is the correct email hxc2001 hxc2001 com
Thank you.
i replied the 18 November.

spagagz
Posts: 4
Joined: Sat Nov 23, 2019 12:39 am

Re: Arburg Multronica

Post by spagagz »

I'm sorry, the email went to spam, so I didn't see it.

Post Reply