Rotary do not work

HxC Floppy Emulator on MSX and compatible support
Post Reply
d.elm
Posts: 3
Joined: Sat Dec 25, 2021 7:20 pm

Rotary do not work

Post by d.elm »

Hello, I modified a GOTEK with OLED and Rotary. Firmware is V.3.8.1.a. The pushbotton is o.k. but the rotary switch don't work.
With a FlashFloppy IMAGE work the rotary.
Attachments
20211228_152137.jpg
20211228_152137.jpg (142.8 KiB) Viewed 8075 times

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Rotary do not work

Post by Jeff »

The right wiring for this model is :

Image

viewtopic.php?f=2&t=4132

d.elm
Posts: 3
Joined: Sat Dec 25, 2021 7:20 pm

Re: Rotary do not work

Post by d.elm »

Hello,Jeff. Thanks for your quick reply.
But that's not how it works, not even the rotary switch.
I have the PCB "SFRK30AT4".
Tank you

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Rotary do not work

Post by Jeff »

d.elm wrote:
Wed Dec 29, 2021 12:40 pm
Hello,Jeff. Thanks for your quick reply.
But that's not how it works, not even the rotary switch.
I have the PCB "SFRK30AT4".
Tank you
Then please use the latest 4.x.x.x firmware available in the "WIP_firmware" folder.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Rotary do not work

Post by Jeff »


d.elm
Posts: 3
Joined: Sat Dec 25, 2021 7:20 pm

Re: Rotary do not work

Post by d.elm »

hello Jeff,
o.k. Thank you, its work fine
Detlef

Post Reply