Screen Upsside down after firmware update

General discussion forum - for all that doesn't fit in any other category.
Post Reply
keluar
Posts: 1
Joined: Sat May 14, 2022 5:51 am

Screen Upsside down after firmware update

Post by keluar »

I was updating my Gotek drive to HxC firmware from flashfloppy. Since the update, my oled screen is upside down.
I have seen in you tube that adding display-type = oled-128x64-rotate in ff.cfg file fixes it on flashfloppy firmware.
OS there similar on for thr HxC firmware? It is annoying to see the screen upside down

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Screen Upsside down after firmware update

Post by Jeff »

You have an U100LQD Gotek. Please use the firmware present in the U100LQD_Gotek_HxC_Firmware folder :

https://hxc2001.com/download/floppy_dri ... rmware.zip

DrD
Posts: 1
Joined: Sun Jul 30, 2023 5:15 pm

Re: Screen Upsside down after firmware update

Post by DrD »

I have the same problem after updating firmware to latest version from U100LQD_Gotek_HxC_Firmware folder/Standard folder.
Is there any way to fix this please?

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Screen Upsside down after firmware update

Post by Jeff »

DrD wrote:
Sun Jul 30, 2023 5:19 pm
I have the same problem after updating firmware to latest version from U100LQD_Gotek_HxC_Firmware folder/Standard folder.
Is there any way to fix this please?
Yes : Since you don't have an U100LQD Gotek, use the non "U100LQD" firmware :

"Firmwares_Updates/Generic_Gotek/Standard_Firmware"

Post Reply