Still trying to figure things out...

General discussion forum - for all that doesn't fit in any other category.
Post Reply
chukroast
Posts: 4
Joined: Wed Apr 13, 2022 7:10 pm
Location: Arkansas - USA

Still trying to figure things out...

Post by chukroast »

Is the Bootloader, buy once and use multiple times until a person figures what they are doing ??
I have 2 computer I will try to use the gotek on, an Exidy Sorcerer and a TRS-80.
I am just getting started trying to use the Floppy Emulator, and the TRS-80 is on the list of supported computers, but the Exidy is not. So I expect I may need to load several attempts at getting something working with the Exidy.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Still trying to figure things out...

Post by Jeff »

If needed you can reflash the bootloader to the gotek how many times you want for free. But i am not sure why this should be needed since the bootloader purpose is to allow firmware updates without reflashing the whole thing.

chukroast
Posts: 4
Joined: Wed Apr 13, 2022 7:10 pm
Location: Arkansas - USA

Re: Still trying to figure things out...

Post by chukroast »

I am early on in trying to implement this Floppy emulator and asking questions based on what I think I am reading.
Thank you for the clarification Jeff.

I will go ahead now and say to everyone, thank you for your patience while I learn the ropes on using the gotek device.

Post Reply