Viking Designer 1 Floppy Emulator

General discussion forum - for all that doesn't fit in any other category.
Post Reply
DennisT
Posts: 1
Joined: Wed Mar 17, 2021 4:50 am

Viking Designer 1 Floppy Emulator

Post by DennisT »

New here. My first post. I'm interested in applying HxC Emulator to a Viking Designer 1 sewing machine. The integrated floppy is a slim custom? 3.5 1.44MB unit. I believe it has a 34 pin connector. I'm wondering what is the dimensions of the bare slim and the one with case to access fitment. My existing drive is still functional but I am thinking about an upgrade. If successful I believe many Designer 1 owners would be interested. Thanks

DennisT

Jeff
Site Admin
Posts: 7910
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Viking Designer 1 Floppy Emulator

Post by Jeff »

DennisT wrote:
Wed Mar 17, 2021 6:27 pm
New here. My first post. I'm interested in applying HxC Emulator to a Viking Designer 1 sewing machine. The integrated floppy is a slim custom? 3.5 1.44MB unit. I believe it has a 34 pin connector. I'm wondering what is the dimensions of the bare slim and the one with case to access fitment. My existing drive is still functional but I am thinking about an upgrade. If successful I believe many Designer 1 owners would be interested. Thanks

DennisT
This :

https://lotharek.pl/productdetail.php?id=41

or this :

https://lotharek.pl/productdetail.php?id=94

Should do the job. But you should check the connector type used in the machine.

Post Reply