Hxc can not more read and write

General discussion forum - for all that doesn't fit in any other category.
Post Reply
glain
Posts: 2
Joined: Tue Sep 29, 2020 9:08 am

Hxc can not more read and write

Post by glain »

Hello,

Sorry, asked directly, but I don’t know what I must search and my English is not the best.

I built a hxc in my sp-1200 and it works fine. I want do a hotswap from the floppy. I load the file from the floppy and connected the hxc. But something must be run wrong. There are only some confused letters and numbers in the display.

I put the sp-1200 off. Try the hotswap again. When I want save the led shines but nothing happens. The sp-1200 says, I must format, but it doesn’t run.

Than I want Boot from the hxc, but it doesn’t run. I can choose files, but the sp-1200 doesn’t read.

Could I damage the the power connector? I read something about this.

Thx for help.

Greetings from Germany.

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Hxc can not more read and write

Post by Jeff »

Does the hxc still display something ?

glain
Posts: 2
Joined: Tue Sep 29, 2020 9:08 am

Re: Hxc can not more read and write

Post by glain »

Hello, the problem is solved.

I make a update and now it runs.

Thx.

Post Reply