Hi,
Looking into buying one of these HxC SD Rev-C drive emu's with the LCD Screen and mounting it internally. However, it occurs to me that I won't have access to the buttons to change to the next disk slot.
How would I go about swapping the slots without access to these buttons?
Presumably with the new A1200 cases people do mount these internally so I'm assuming there is a way to change disk slots without having to breakout the soldering iron and adding my own external buttons?
Thanks
HxC SD Floppy Emulator
Re: HxC SD Floppy Emulator
The Rev C have a connector on the pcb to connect the LCD and the buttons.
But you need to add/solder this connector since Lotharek doesn't mount it. (J2 / Front Panel connector)
See : https://hxc2001.com/download/floppy_dri ... Design.zip
EDIT : I see this PCB marking: "REV C 100910" -> This board design is ten years and 10 days old !
But you need to add/solder this connector since Lotharek doesn't mount it. (J2 / Front Panel connector)
See : https://hxc2001.com/download/floppy_dri ... Design.zip
EDIT : I see this PCB marking: "REV C 100910" -> This board design is ten years and 10 days old !