Hello,
I have a question about HxC Floppy Emulator v2.2.2.1.
It ignores an empty file named "doublestep" in the raw files folder.
(HxC Floppy Emulator 2.1.24.1 can work it.)
However, there is KFRAWLOADER_DOUBLE_STEP in Internal parameters.
When KFRAWLOADER_DOUBLE_STEP is set to "1", It works fine.
Since Internal parameters can not be saved,
a setting Internal parameters is required every single time running HxC Floppy Emulator...
Thanks,
Fuyuki
an empty file "doublestep" does not work on version v2.2.2.1.
Re: an empty file "doublestep" does not work on version v2.2.2.1.
you can "save" this parameter.fyk wrote: ↑Sat Dec 28, 2019 1:44 amHello,
I have a question about HxC Floppy Emulator v2.2.2.1.
It ignores an empty file named "doublestep" in the raw files folder.
(HxC Floppy Emulator 2.1.24.1 can work it.)
However, there is KFRAWLOADER_DOUBLE_STEP in Internal parameters.
When KFRAWLOADER_DOUBLE_STEP is set to "1", It works fine.
Since Internal parameters can not be saved,
a setting Internal parameters is required every single time running HxC Floppy Emulator...
Thanks,
Fuyuki
just put an "config.script" file in the exec folder or in the kf raw folder with this line inside :
set KFRAWLOADER_DOUBLE_STEP 1
Re: an empty file "doublestep" does not work on version v2.2.2.1.
Hi Jeff,Jeff wrote: ↑Sat Dec 28, 2019 2:51 amyou can "save" this parameter.fyk wrote: ↑Sat Dec 28, 2019 1:44 amHello,
I have a question about HxC Floppy Emulator v2.2.2.1.
It ignores an empty file named "doublestep" in the raw files folder.
(HxC Floppy Emulator 2.1.24.1 can work it.)
However, there is KFRAWLOADER_DOUBLE_STEP in Internal parameters.
When KFRAWLOADER_DOUBLE_STEP is set to "1", It works fine.
Since Internal parameters can not be saved,
a setting Internal parameters is required every single time running HxC Floppy Emulator...
Thanks,
Fuyuki
just put an "config.script" file in the exec folder or in the kf raw folder with this line inside :
set KFRAWLOADER_DOUBLE_STEP 1
Thank you so much for your quick reply!
I could set it by "config.script".
Do you have a documentation about "config.script" and "Internal parameters"?
Best,
Fuyuki
Re: an empty file "doublestep" does not work on version v2.2.2.1.
The hxc library run the config.script from the hxc software folder at startup and from the kf .raw folder if present.
There is currently only the command "set" which set one internal variable.
Here it is an script example :
https://sourceforge.net/p/hxcfloppyemu/ ... nit.script
This is the hxc library internal script used to setting up the default internal parameters.
config.script is executed right after init.script if present.
About the documentation, i will just comment a little bit "init.script"
Re: an empty file "doublestep" does not work on version v2.2.2.1.
I really appreciate the link.Jeff wrote: ↑Sat Dec 28, 2019 10:27 amThe hxc library run the config.script from the hxc software folder at startup and from the kf .raw folder if present.
There is currently only the command "set" which set one internal variable.
Here it is an script example :
https://sourceforge.net/p/hxcfloppyemu/ ... nit.script
This is the hxc library internal script used to setting up the default internal parameters.
config.script is executed right after init.script if present.
About the documentation, i will just comment a little bit "init.script"
Fuyuki