Issue with Rev C HxC SDcard emulator

General discussion forum - for all that doesn't fit in any other category.
Post Reply
huggyone76
Posts: 13
Joined: Mon Nov 04, 2013 11:49 pm

Issue with Rev C HxC SDcard emulator

Post by huggyone76 »

Hi !

One of my two Rev C HxC goes into troubles ;-)
After a firmware update, I can select a floppy image, but no way to run this.
So, just to try, I swapped the two PICs between my two Rev C and so, the issue swapped with the PIC ;-)

I'm not able to update firmware anymore it seems... So, what can I do ?

Thank you

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Issue with Rev C HxC SDcard emulator

Post by Jeff »

huggyone76 wrote:
Sun Jun 04, 2023 6:02 pm
Hi !

One of my two Rev C HxC goes into troubles ;-)
After a firmware update, I can select a floppy image, but no way to run this.
So, just to try, I swapped the two PICs between my two Rev C and so, the issue swapped with the PIC ;-)

I'm not able to update firmware anymore it seems... So, what can I do ?

Thank you
Try to update it from another machine, and check the +5V voltage on the previous machine.

Post Reply