Errors reading disks converted from Kyroflux RAW to HFE (re: BAD CRC)

General discussion forum - for all that doesn't fit in any other category.
Post Reply
sofakng
Posts: 8
Joined: Fri May 28, 2021 9:58 pm

Errors reading disks converted from Kyroflux RAW to HFE (re: BAD CRC)

Post by sofakng »

I'm new to Kryoflux RAW and HxC, but I've found some test Kryoflux files I'm trying to convert to HFE to use on my IBM PC.

HxCFloppyEmulator (v2.5.6.6) for Windows appears to load the raw files successfully (84 tracks and 2 sides) but the Track Analyzer shows several tracks with BAD CRC. I don't know if this is normal (ie. copy protection) or if it indicates an actual problem.

I've created a log but it was 96 MB (!!!) after loading the image.

I've tried to export this to HFE but my IBM PC gives a disk read error.

Does this indicate a bad image or can something else be wrong? I've tried several test images (raw dumps) but none of them seem to convert or work properly.

Jeff
Site Admin
Posts: 7592
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Errors reading disks converted from Kyroflux RAW to HFE (re: BAD CRC)

Post by Jeff »

share some stream view screen.

sofakng
Posts: 8
Joined: Fri May 28, 2021 9:58 pm

Re: Errors reading disks converted from Kyroflux RAW to HFE (re: BAD CRC)

Post by sofakng »

Like this? (click image for full-resolution)

Image

Post Reply