I just finished putting the HxC Floppy Drive Emulator to the disc controller of a Sharp MZ80B (may have a look at http://www.sharpmz.org), got dsk files from http://www.sharpmz.org/mz-80b/download/rb_DSK.zip, converted them and the Sharp Basic booted at once.
Well, well - very nice ....
Sharp MZ80B supported
Re: Sharp MZ80B supported
An here is a video about the MZ-80 and it also shows the interface:
http://www.youtube.com/watch?v=6Vz-ZzQ2dEQ
http://www.youtube.com/watch?v=6Vz-ZzQ2dEQ
Re: Sharp MZ80B supported
Thanks a lot for the feedback !feldti wrote:An here is a video about the MZ-80 and it also shows the interface:
http://www.youtube.com/watch?v=6Vz-ZzQ2dEQ
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Sharp MZ80B supported
If you are still around, I could use some help with my MZ-80b. The video was great but really didn't show any 'how to' for us noobs.
Do you have disk basic HFE images?
Are there any settings I should use to get this working?
I assumed the cable is straight through 37 to 34 pin?
Have you tried to do it on a HxC flashed Gotek?
Thanks in advance.
Do you have disk basic HFE images?
Are there any settings I should use to get this working?
I assumed the cable is straight through 37 to 34 pin?
Have you tried to do it on a HxC flashed Gotek?
Thanks in advance.
Re: Sharp MZ80B supported
I have not done very much with it forthe last 8 years ... some starting, but thats it. I used an original FDC controller card of the sharp computer and the cable is a straight cable.arnuph1s wrote: ↑Sat May 15, 2021 3:17 amIf you are still around, I could use some help with my MZ-80b. The video was great but really didn't show any 'how to' for us noobs.
Do you have disk basic HFE images?
Are there any settings I should use to get this working?
I assumed the cable is straight through 37 to 34 pin?
Have you tried to do it on a HxC flashed Gotek?
Thanks in advance.
Re: Sharp MZ80B supported
The link is now:parc_de wrote: ↑Tue Jul 06, 2021 10:07 amI have not done very much with it forthe last 8 years ... some starting, but thats it. I used an original FDC controller card of the sharp computer and the cable is a straight cable.arnuph1s wrote: ↑Sat May 15, 2021 3:17 amIf you are still around, I could use some help with my MZ-80b. The video was great but really didn't show any 'how to' for us noobs.
Do you have disk basic HFE images?
Are there any settings I should use to get this working?
I assumed the cable is straight through 37 to 34 pin?
Have you tried to do it on a HxC flashed Gotek?
Thanks in advance.
http://original.sharpmz.org/mz-80b/download/rb_DSK.zip
try to download and store it because, the "B" infos are getting lost (older links are not working any more).