Use IMG file directly

HxC Floppy emulator support for all others computers...
Post Reply
dpelan@woh.rr.com
Posts: 2
Joined: Tue Jun 05, 2018 5:56 am

Use IMG file directly

Post by dpelan@woh.rr.com »

I'm running a Heathkit H-89 which supports multiple formats on the soft sector controller (40/80 track, 640k 800k, etc.). I currently convert my .IMG file which is a byte image of a disk to an .IMD file, then use HxC Floppy Emulator to convert to an .HFE file. Is there a way to use a .IMG file directly in the HxC flashed Gotek by supply some sort of configuration file?

Thanks,

Darrell

Jeff
Site Admin
Posts: 8092
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Use IMG file directly

Post by Jeff »

yes you can specify a custom img/raw file definition : https://hxc2001.com/custom_fw/
(see "User defined raw file image/disk format")

Post Reply