Sord M68 timeout error

HxC Floppy emulator support for all others computers...
arjoll
Posts: 15
Joined: Thu Jan 15, 2015 5:03 am
Location: Invercargill, New Zealand
Contact:

Re: Sord M68 timeout error

Post by arjoll »

Thanks so much - it works!

I'll try the same thing with a CP/M-68K disk in the weekend and see how I get on, but this is a huge leap forward! Next step after that will be buying a Rev F so I can mount it permanently, with the HxC as drive 0 and 1, and a normal floppy as drive 2.

And then on to the M23 - SSQD, 100 tpi. I'll be interesting!

Videos:
https://1drv.ms/v/s!Ajyp8sRoAWZanpxL6-4 ... g?e=6IPN9m
https://1drv.ms/v/s!Ajyp8sRoAWZanpxKDKB ... w?e=ySrmO4

Will do better ones and some photos when I get a chance to document this.

arjoll
Posts: 15
Joined: Thu Jan 15, 2015 5:03 am
Location: Invercargill, New Zealand
Contact:

Re: Sord M68 timeout error

Post by arjoll »

Hi again

Turns out it works with CP/M-68K as well - I can't format a disk, but because the logical format is the same I can copy a CP/M disk over the FDOS image and it works perfectly!

I have shared this in the Facebook group as well, but this is my rev C booting up and running PIPS-III: https://youtu.be/rw1Orl_tOv4

I'll have to buy a Ref F at some point so I can mount it permanently!

Post Reply