Emulator on Yamaha Clavinova
Re: Emulator on Yamaha Clavinova
In the menu 1 please try the S950 and IBM PC DD and HD modes !
Re: Emulator on Yamaha Clavinova
I tried every options in Menu 1 and have some interesting behaviour :
Menu 1 - Interface mode
00 = AUTO (DEFAULT) ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
01 = IBM PC DD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
02 = IBM PC HD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
03 = ATARI ST DD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
04 = ATARI ST HD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
05 = AMIGA DD --->('0 0 0' on the Gotek - The keyboard screen ask to format the USB-Stick and i got an ERROR ER1 when i validate with "Yes" the formating - USB-Stick is blinking)
06 = AMIGA HD --->('0 0 0' on the Gotek - The keyboard screen ask to format the USB-Stick and i got an ERROR ER2 when i validate with "Yes" the formating - USB-Stick is blinking)
07 = CPC DD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
08 = GENERIC SHUGART DD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
09 = IBMPC ED --->('0 0 0' on the Gotek - The keyboard screen ask to format the USB-Stick and i got an ERROR ER2 when i validate with "Yes" the formating - USB-Stick is blinking)
0A = MSX2 DD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
0B = C64 DD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
0C = EMU SHUGART ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
0D = S950 DD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
0E = S950 HD ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
0F = S900/S950 (Density Auto) ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
10 = PC DD/HD (Density Auto) ---> no reaction ('0 0 0' on the Gotek - no reaction from keyboard screen - USB-Stick is blinking)
I was able to reproduce the errors each time in mode 5, 6 and 9.
In the keyboard's manual, I found this:
Error code Er1 : Disk read or write error (e.g. unformatted disk)
Error code Er2 : Disk write-protected
The USB Stick ist formated as FAT using "HxCFloppyEmulator_DosDiskBrowser" and an DSKA0000.HFE image.
Re: Emulator on Yamaha Clavinova
Try this :
https://hxc2001.com/custom_fw/
Set "Non gated mode" and request a new firmware. Once received update your gotek.
https://hxc2001.com/custom_fw/
Set "Non gated mode" and request a new firmware. Once received update your gotek.
Re: Emulator on Yamaha Clavinova
Ok thanks @Jeff, I went on this website, let every default values as they are and just checked "Non gated mode" and ordered the firmware.Jeff wrote: ↑Sun Feb 20, 2022 12:10 amTry this :
https://hxc2001.com/custom_fw/
Set "Non gated mode" and request a new firmware. Once received update your gotek.
Keep you posted on the process.
Re: Emulator on Yamaha Clavinova
Ok, so I just received the firmware, flashed it on the GOTEK.circark wrote: ↑Sun Feb 20, 2022 6:26 pmOk thanks @Jeff, I went on this website, let every default values as they are and just checked "Non gated mode" and ordered the firmware.Jeff wrote: ↑Sun Feb 20, 2022 12:10 amTry this :
https://hxc2001.com/custom_fw/
Set "Non gated mode" and request a new firmware. Once received update your gotek.
Keep you posted on the process.
There is now a new behaviour from the GOTEK and the keyboard: when I power up the keyboard with USB-Stick (with a floppy image on it), i have this sequence:
- hXc on the GOTEK and the USB-Stick light is not blinking anymore, that mean that the GOTEK is "reading" something
- the GOTEK display "0 0 0" (as usual)
- the keybard screen is empty/black (as usual)
- the keyboard screen display "For" for "Format", for a fraction of second (I was able to read it by filming it in slow motion with my phone).
![Idea :idea:](./images/smilies/icon_idea.gif)
- the keyboard screen is empty/black again and the USB-Stick is now flashing (as usual)
I tried to use the Format-Button on the keyboard but I don't have any feedback.
Re: Emulator on Yamaha Clavinova
Are you sure that you are using an DD image ?
Re: Emulator on Yamaha Clavinova
Hello @Jeff
I'm here again, with latest firmware 5.0.0.7a on CVP-55.
I have USB pendrive whit shugart HXCSDFE.CFG file that you upload for me on 2019. It doesn't works well, because when I power up Clavinova with pendrive inserted (of I insert it with Clavinova powered up) it doesn't charge the latest disk selected. I have to move one disk down or up to get it to work.
What it's the best configuration for Clavinova CVP-55/65/75 series? Can you explain it via CFG file or directly hardware selection options?
Thanks a lot!
I'm here again, with latest firmware 5.0.0.7a on CVP-55.
I have USB pendrive whit shugart HXCSDFE.CFG file that you upload for me on 2019. It doesn't works well, because when I power up Clavinova with pendrive inserted (of I insert it with Clavinova powered up) it doesn't charge the latest disk selected. I have to move one disk down or up to get it to work.
What it's the best configuration for Clavinova CVP-55/65/75 series? Can you explain it via CFG file or directly hardware selection options?
Thanks a lot!
Re: Emulator on Yamaha Clavinova
Try to generate a new firmware with the "Non gated mode" option enabled :
https://hxc2001.com/custom_fw/
you may also need to try both S0 and S1 jumper settings.
https://hxc2001.com/custom_fw/
you may also need to try both S0 and S1 jumper settings.
Re: Emulator on Yamaha Clavinova
I made it, but same issue.Jeff wrote: ↑Sat Oct 22, 2022 5:35 pmTry to generate a new firmware with the "Non gated mode" option enabled :
https://hxc2001.com/custom_fw/
you may also need to try both S0 and S1 jumper settings.
I think we had this issue long time ago, lately was fixed, and now it comes again.
Can I do something more to fix it?
Thanks!
EDIT - SOLVED!!!
I downgraded to HxCFEUSB_V3_3_8_14a.UPD that you made for Clavinova after a lot of test, I put it on USB HXCSDFE.CFG custom file that you sended me on 2019. All working again. Then update to 5.0.1.1a and works like a charm!
Very happy!